Reasons And Solutions For Different Thickness Of Plywood

I believe that you have found in the use of plywood that the plywood of the agreed batch will also have the problem of different thickness. There are many reasons for the different thickness of the plywood. The following points will introduce the solution to you.
The reasons for the different thickness of plywood:
1. The number of hot-pressed sheets in each interval in plywood production is too large.
2. The different thickness of the veneer will eventually lead to the different thickness of the plywood.
3. The tilt of the pressure plate or the tilt of the plunger will also cause the thickness of the plywood to vary.
4. The calculation of the thickness of the plywood blank is incorrect or the pressure and temperature are too high during the hot pressing process.
The solution to the different thickness of plywood:
As far as possible, use the hot pressing process of one sheet and one pressing to improve the quality of plywood veneer.
The above is all about how to solve the problem of different thickness of plywood. If you want to buy plywood, please pay attention to the problem of different thickness of plywood, try to avoid buying plywood with different thickness, so as not to cause difficulties in future processing.