Formwork LVL

Formwork Laminated Veneer Lumber LVL

Formwork LVL is a Laminated Veneer Lumber (LVL) Engineered Wood Product.LVL has the characteristics of high strength, high stiffness and low variability, which means that these properties can be fully exploited as characteristic values in structural design. In addition, because there are no large defects, LVL has an extremely high strength-to-weight ratio, and LVL of the same mass is twice as strong as steel. Because LVL is laminated structure, dimensional stability, no warping, no fragmentation and cracking. LVL has been dried before leaving the factory, and as long as the LVL components are avoided directly in the open air, the risk of drying shrinkage on the installation site or in the completed building is reduced.Formwork LVL are designed for the high load-bearing and corrosive environment of the concrete formwork industry and are used as formwork bearers, joists, soldiers and walers.

Linyi foryou is a professional supplier of formwork lvl with more than 10 years expereinces.We use the best raw materials, advanced production equipment, professional technical workers to produce certificated formwork lvl, which are well received by Australian customers.

Specification

Veneer:radiata pine

Joints:scarf/butt

Adhesive:Phenolic

Bond: Type A marine AS/NZS 2098 AS 2574

Density:580kgs/m³ approximately

Tolerance:

                thickness -2mm +2mm

                length -0mm +10mm

                height -0mm +2mm

Painting color:yellow,red,blue,green,orange,white,black as requirement

 

Sizes

thickness	height	length
47	950	from 2400mm to 6000mm
65	950	from 2400mm to 6000mm
77	130	from 2400mm to 6000mm
77	150	from 2400mm to 6000mm
36mm	100mm	from 2400mm to 6000mm
36mm	150mm	from 2400mm to 6000mm
36mm	400mm	from 2400mm to 6000mm

We can also supply you with customized specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) According to the weight ratio, the strength is twice that of steel.

(2) laminated structure, dimensional stability, no warping, fragmentation and cracking.

(3) Uniform material properties.

(4) Key advantages of industrial application; Stable product quality and size.

(5) Easy to drill, cut, fix and install, only standard woodworking tools.

(6) Accurate design, easy to cut.

(7) Can be made according to the exact size, to minimize the loss of crosscutting and sawing.

(8) Wide range of size application: product specifications are not limited by the size of raw materials.

(9) Light weight, easy to handle.

(10) The factory is dry, and the moisture content is usually 8% to 10%, which can make the shrinkage deformation of the construction site smaller.

(11) Easy to combine with other building products.

(12) Factory production reduces site construction time.
(13) Use certified, fully traceable, renewable and recyclable wood.
(14) Environmentally friendly carbon storage: 1㎡ of LVL contains the equivalent of 789kg of CO2 storage.
(15) Production costs are higher than sawn timber, but when built with LVL, less material is required to meet the design requirements.

 

 

 

 

 

 

 

 

 

 

 

At the same time, we can also provide you F17 formply,Hardwood formply,Radiata pine plywood,Anti slip film faced plywood,OSB,etc.

Please contact our sales team for more detailed information about plywood products.

Hot Tags: formwork lvl, China formwork lvl manufacturers, suppliers, factory